What must be considered in the decoration planning of dust-free workshops

The decoration planning of a dust-free workshop must be carried out by companies with rich experience in this industry, and you also need to have a clear understanding of the materials required for decoration, so that the dust-free workshop decorated is safe. Let's take a detailed look at what precautions should be taken in the decoration planning of a dust-free workshop.

1. Address selection

The dust-free workshop must be selected in areas with low population density, and it is also necessary to be located far away from chemical factories. Dust free workshops should be selected in areas with low atmospheric concentration, with a distance between risk areas and noise areas, such as docks, airports, factories, and other surrounding areas, which are not suitable for dust free workshops.

2. Data selection

The selection of materials for the decoration planning of a dust-free workshop is crucial. The air purification system next to the dust-free workshop plays a crucial role, and the selection of air ducts next to the purification system is of utmost importance. Pay attention to the sealing of the air duct and conduct functional testing. The air duct shall have good corrosion resistance and aging resistance. If the air duct you use is not functioning properly, it will inevitably have an impact on the functionality of the dust-free workshop. Therefore, when selecting air ducts, it is not only important to consider their quality, but also to avoid spoilage and pay attention to the amount used.

3. Flat wall surface

The decoration planning of the dust-free workshop is not to use masonry walls or plastered walls. If it is necessary to use them, then the plastering must be in accordance with the grade specifications. After plastering the wall, it is necessary to apply a coating layer, which is flame retardant, non cracking, lubricated on the surface, and non absorbent. When planning the decoration of the dust-free workshop, the interior and exterior of the ceiling should be flat, without glare, and the concave and convex surfaces should be lowered. It is not necessary to install skirting lines, and if necessary, it cannot stand out from the wall.

In short, the decoration planning of a dust-free workshop must pay attention to the three aspects mentioned above, in order to decorate a dust-free workshop that meets the requirements.